Driver Description Download drivers for Omnikey AG OMNIKEY 3821 card readers (Windows 7 x64), or install DriverPack Solution software for automatic driver download and update Are you tired of looking for the drivers for your devices?
- 2Driver for readers
- 3Install Smart Card driver
What is nessesary to work with digital signature
- . OmniKey CardMan 3821 To use the PinPad card reader in Windows, the driver of the corresponding card reader must be installed. By default, Windows has installed the universal (WUDF) driver, but it does not support the PinPad card reader. It is recommended that you follow these steps to resolve the issues.
- This section provides installation information that is specific to smart card reader drivers for Microsoft Windows. Vendors that supply their own reader drivers should make each driver a member of the SmartCardReader setup class in the INF Version Section of the driver's INF file.
- This section provides installation information that is specific to smart card reader drivers for Microsoft Windows. Vendors that supply their own reader drivers should make each driver a member of the SmartCardReader setup class in the INF Version Section of the driver's INF file. Vendors must also add a section to properly configure the.
- To use this application, you need a usb card reader (e.g. ACS ACR38U-ND, ACS ACR39U-NF, Gemplus GemPC Twin, C3PO LTC31, OmniKey CardMan 3121) and your device's usb connector must be.
In order to use your digital sigature is nessesary to install the driver for the smart card reader, the middleware for the smart card and the service for smart card resders (pcscd) running. The service pcscd must start automatically when you plug a reader.
Driver for readers
ACR 38C
If the your reader is labeled with ACR38C-SPC-R, mLector-S or ACR39T at the bottom, then your device works with the build in driver in the OS and you don't have to install any drivers. Robonica Driver download.
Omnikey (HID Global)
For you to use OmniKey CardMan, you have to install the driver from HID Global for your version of OS X:
- Driver for 10.11 - 10.15.
- Driver for 10.6 - 10.10.
Install Smart Card driver
Smart Card Reader Omnikey
Depend of the model of your card you have to use different driver. The model of the card is on the Personal Access Rights, which you receive with your card. You can find your smart card model with our diagnostic software tool
For smart card Bit4ID
Please write to support@infonotary.com , and we will send you the driver.
After the installation continue with configuration Firefox or Safari.
For smart card Siemens CardOS
For smart card Siemens you must install OpenSC. With OpenSС you dont install any program with graphic interface so you wont find anything in Applications.
You can download the latest version for your OS from here:
- For macOS 10.15 and newer.
- For macOS 10.9 - 10.14.
After the installation continue with configuration for Firefox or Safari.
Testing Installation
If you have problem using your certificate, you can run the following program to identify it:
The program can send information directly to us. After report is accepted, it will show nine digit number, that can be used by our support team to see test result. If you do not have Internet connection or direct sending failed, you can save report and send it to support@infonotary.com.
Reader and card should be connected to the computer when test program is started.
Drivers Omnikey Card Reader Login
Bit4id Universal Middleware can be uninstaled, by running the program Uninstaller from the folder /System/Library/bit4id.-->
Documentation
Documentation for OpenSC is available on Internet or in folder /Library/OpenSC/doc/ after the installation.
On the page Working with OpenSC you can find instruction for th most common operation with OpenSC.
Omnikey 3x21 Smart Card Reader Driver